HP ML530 ProLiant ML530 Generation 2 Server Setup and Installation Guide - Page 198
The following illustration shows a rack server cabled to an external storage device
UPC - 720591250669
View all HP ML530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
Cabling the Server IMPORTANT: The ProLiant ML530 Generation 2 server ships with the drive cages cabled internally to SCSI connectors A and B. If you want to cable a SCSI device to SCSI connector A or B using the internal-to-external SCSI cable assembly, you must first disconnect the appropriate drive cage cable. Once you have disconnected a drive cage cable, you must cable it to a controller board to retain use of that drive cage. The following illustration shows a rack server cabled to an external storage device through the optional VHDCI SCSI connector. Figure 7-8: Standard cable routing of an external storage device through the VHDCI SCSI connector HP ProLiant ML530 Generation 2 Server Setup and Installation Guide 7-13
Cabling the Server
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
7-13
IMPORTANT:
The ProLiant ML530 Generation 2 server ships with the drive cages cabled
internally to SCSI connectors A and B.
If you want to cable a SCSI device to SCSI connector A or B using the internal-to-external
SCSI cable assembly, you must first disconnect the appropriate drive cage cable. Once you
have disconnected a drive cage cable, you must cable it to a controller board to retain use of
that drive cage.
The following illustration shows a rack server cabled to an external storage device
through the optional VHDCI SCSI connector.
Figure 7-8:
Standard cable routing of an external
storage device through the VHDCI SCSI connector