HP ML530 ProLiant ML530 Generation 2 Server Setup and Installation Guide - Page 67
Power up the server. See Installing the Rack Server or
UPC - 720591250669
View all HP ML530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Installing Hardware Options 13. Reinstall the processor air baffle: a. Insert the air baffle into the server. Be sure to insert the plastic tab on the air baffle into the raised metal slot on the chassis wall (1). b. Tighten the thumbscrews (2). Figure 3-15: Installing the processor air baffle 14. Reinstall the access panel. 15. Install the server. See Chapter 5, "Installing the Rack Server" or Chapter 6, "Installing the Tower Server." 16. Power up the server. See Chapter 5, "Installing the Rack Server" or Chapter 6, "Installing the Tower Server." NOTE: The ROM sets the processing frequency during the Power-On Self-Test (POST). 17. Be sure that the internal health LED on the front of the system is illuminated green, indicating that the system is functioning properly. For detailed information on LEDs, see Appendix C, "System LEDs and Switches." 18. If the LED indicates an error, see Appendix D, "Troubleshooting," or refer to the troubleshooting guide for instructions. HP ProLiant ML530 Generation 2 Server Setup and Installation Guide 3-21