HP ML530 ProLiant ML530 Generation 2 Server Setup and Installation Guide - Page 182
Powering up the tower server, Table 6-2, Front Panel LED Activity During the Power-On
UPC - 720591250669
View all HP ML530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Installing the Tower Server To power up the server: 1. Open the front bezel door and press the Power On/Standby button to power up the server. Figure 6-3: Powering up the tower server 2. Observe the front panel LEDs to be sure that the server has a successful power-on sequence. The following table describes a successful power-on sequence. Table 6-2: Front Panel LED Activity During the Power-On Sequence Item Description Unit Identification (UID) Off Internal health From off to green External health From off to green Embedded NIC connector activity From off to green if there is a link on the NIC From off to flashing green for network activity System power From amber to green Note: For a detailed explanation of all system LEDs, see Appendix C, "System LEDs and Switches." 6-6 HP ProLiant ML530 Generation 2 Server Setup and Installation Guide