HP ML530 ProLiant ML530 Generation 2 Server Setup and Installation Guide - Page 221

Server Configuration and Utilities ASR-2 increases server availability by restarting the server within 10 minutes after a system hang or shutdown. At the same time, the Insight Manager 7 console notifies you by sending a message to a designated pager number that ASR-2 has restarted the system. You can disable ASR-2 from the Insight Manager 7 console or RBSU. Integrated Management Log The IML records hundreds of events and stores them in an easy-to-view form. The IML time-stamps each event with one-minute granularity. Events listed in the IML are categorized as one of four event severity levels: • Status-indicates that the message is informational only • Repaired-indicates that corrective action was taken • Caution-indicates a non-fatal error condition occurred • Critical-indicates a component failure has occurred IML requires HP operating system-dependent drivers. Refer to the SmartStart CD for instructions on installing the appropriate drivers. Viewing the Log You can view recorded events in the IML in several ways, including the following: • From within the Insight Manager 7 • From within the Survey Utility • From within operating system-specific IML viewers - For a Windows NT operating system, Event Viewer, or IML Viewer - For a NetWare operating system, IML Viewer - For a Linux operating system, IML Viewer Application HP ProLiant ML530 Generation 2 Server Setup and Installation Guide 8-19