HP ML530 ProLiant ML530 Generation 2 Server Setup and Installation Guide - Page 161

Installing the Rack Server Attaching the Cable Management Arm Bracket The cable management arm bracket fastens to the top-left-rear of the rack server chassis as you look at the rear of the server. The bracket provides an attachment point for the cable management arm from the server to the rear frame of the rack. To attach the cable management arm bracket: 1. Align the two keyholes on the cable management arm bracket over the posts on the rear panel of the chassis. 2. Slide the arm down to secure the keyholes onto the posts (1). 3. Tighten the thumbscrew to secure the cable management arm to the server (2). Figure 5-9: Attaching a cable management arm bracket to the server 5-14 HP ProLiant ML530 Generation 2 Server Setup and Installation Guide