HP ML530 ProLiant ML530 Generation 2 Server Setup and Installation Guide - Page 174
Installing an Operating System, Table 5-3, Front Panel LED Activity During the Power-On, Sequence
UPC - 720591250669
View all HP ML530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Installing the Rack Server The following table describes a successful power-on sequence. Table 5-3: Front Panel LED Activity During the Power-On Sequence Item Description Unit Identification (UID) Off Internal health From off to green External health From off to green Embedded NIC activity From off to green if there is a link on the NIC From off to flashing green for network activity System power From amber to green Note: For a detailed explanation of all system LEDs, see Appendix C, "System LEDs and Switches." When the server powers on for the first time, the server performs a POST. You must then launch RBSU to configure your server. After selecting initial system settings, install your operating system and perform additional configuration tasks. For additional information about configuring your server with RBSU, refer to the ROM-Based Setup Utility User Guide. Installing an Operating System To install an operating system on a new or previously unconfigured server, you must configure the server with RBSU. To configure the server for the first time: 1. Launch RBSU. 2. When prompted, select a language. 3. Select the operating system you want to install on your server. A dialog box appears, indicating that the system configuration is complete. 4. Press the F10 key to exit RBSU or press any other key to return to the RBSU main menu. 5. Reboot the system. HP ProLiant ML530 Generation 2 Server Setup and Installation Guide 5-27