HP ML530 ProLiant ML530 Generation 2 Server Setup and Installation Guide - Page 205

Server Configuration and Utilities Saving RBSU Configuration Settings RBSU automatically saves settings when you press the Enter key. The utility does not prompt you for confirmation of settings before you exit the utility. To change a selected setting, you must select a different setting and press the Enter key. Using RBSU RBSU does not run automatically. The first time you power up the server, the system defaults to Windows 2000 and waits temporarily so you can select a different operating system by using RBSU. Press the F9 key to enter RBSU. While you are in RBSU, press any key to return to the RBSU main menu, or exit RBSU by pressing the Esc key, then pressing the F10 key at the prompt. NOTE: Most of the features in RBSU are not required in the setup of your server. The options in this utility are designed to assist with specific server configuration issues. RBSU is divided into a series of menu selections designed to configure specific areas of the system. The primary menus are as follows: • System Options • PCI Devices • Standard Boot Order (IPL) • Boot Controller Order • Date and Time • Automatic Server Recovery • Server Passwords • Server Asset Text • Advanced Options • Utility Language For a complete explanation of RBSU features and functions, refer to the ROM-Based Setup Utility User Guide on the Documentation CD. HP ProLiant ML530 Generation 2 Server Setup and Installation Guide 8-3