HP ML530 ProLiant ML530 Generation 2 Server Setup and Installation Guide - Page 48

Installing Hardware Options The following warnings apply to all procedures: WARNING: The server is very heavy, up to 66 kg (146 lb). To reduce the risk of personal injury or damage to the equipment: • Remove all hot-plug power supplies to reduce the weight of the server before lifting it. • Observe local occupational health and safety requirements and guidelines for material handling. • Get help to lift and maneuver the server. • Be sure the server casters are locked in place on tower models. WARNING: To reduce the risk of personal injury or damage to the equipment: • Heed all warnings and cautions throughout the installation instructions. • Allow internal system components to cool before touching any surfaces. • Be sure that the power to the server is turned off and that all power cords are disconnected. • Allow only qualified service personnel-those trained to work with products capable of producing hazardous energy levels-to install options, except when installing hot-plug power supplies or hard drives. CAUTION: Electrostatic discharge can damage electronic components. Be sure you are properly grounded before beginning any installation procedures. The following warnings apply to in-rack operations only: WARNING: Always begin by mounting the heaviest item on the bottom of the rack. Continue to populate the rack from the bottom to the top. WARNING: To reduce the risk of personal injury or equipment damage, always be sure that the rack is adequately stabilized before extending a component outside the rack. A rack may become unstable if more than one component is extended for any reason. Extend only one component at a time. 3-2 HP ProLiant ML530 Generation 2 Server Setup and Installation Guide