HP ML530 ProLiant ML530 Generation 2 Server Setup and Installation Guide - Page 38
Optimum Environment, Space and Airflow Requirements
UPC - 720591250669
View all HP ML530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Planning the Server Installation • Server warnings and cautions • Server shipping contents Optimum Environment When installing the HP ProLiant ML530 Generation 2 server in a rack, select a location that meets the environmental standards described in the following sections. Information is available for optional rack adapter kits to install your server in a telco or third-party rack. Complete instructions for using adapter kits to install your server in a rack are included with each option kit. • For information about obtaining rack option kits for third-party racks, refer to the HP website: www.hp.com/servers/proliant • For information about installing your server in a telco rack, refer to the following website: www.racksolutions.com/hp Space and Airflow Requirements To enable servicing and adequate airflow, observe the following spatial requirements when deciding where to install your Compaq branded or third-party rack: • Leave a minimum clearance of 63.5 cm (25 inches) in front of the rack. • Leave a minimum clearance of 76.2 cm (30 inches) in the back of the rack. • Leave a minimum clearance of 121.9 cm (48 inches) from the back of the rack to the rear of another rack or row of racks. 2-2 HP ProLiant ML530 Generation 2 Server Setup and Installation Guide