HP ML530 ProLiant ML530 Generation 2 Server Setup and Installation Guide - Page 92
Hot-Plug Power Supplies, Power up the server. See Powering Up the Server
UPC - 720591250669
View all HP ML530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Installing Hardware Options IMPORTANT: Once the Remote Insight board is installed in your server, be sure that you connect your video cable into the video connector on the rear of the Remote Insight board. The standard video connector on the server rear panel is not used when the Remote Insight board is installed. For more information, refer to the documentation that ships with the Remote Insight board option kit. 9. Power up the server. See "Powering Up the Server" in Chapter 5, "Installing the Rack Server" or Chapter 6, "Installing the Tower Server." 10. Be sure that the internal health LED on the front panel LED assembly is illuminated green, indicating that the system is functioning properly. For detailed information on LEDs, see Appendix C, "System LEDs and Switches." 11. If the LED indicates an error, see Appendix D, "Troubleshooting," or refer to the troubleshooting guide for instructions. Hot-Plug Power Supplies CAUTION: Hot-plug power supplies for the ProLiant ML530 Generation 2 server are keyed to ensure that only 600-W hot-plug power supplies can be installed in the server. The handles on 600-W power supplies are carbon (black) to distinguish them from 450-W power supplies, which are opal (white). CAUTION: Always populate power supply bays with either a power supply or blank. Proper airflow can only be maintained when the bays are populated. Unpopulated power supply bays can lead to improper cooling and thermal damage. IMPORTANT: For rack-model servers, do not install the power supplies until after the server is installed in the rack. Leaving the power supplies out reduces the weight of the server for purposes of rack installation. 3-46 HP ProLiant ML530 Generation 2 Server Setup and Installation Guide