HP ML530 ProLiant ML530 Generation 2 Server Setup and Installation Guide - Page 166

Installing the Rack Server Attaching the Cable Management Arm A double-hinged cable management arm and fasteners ship with each server. The cable management arm attaches to the server's cable management arm bracket and to the rear frame of the rack. All cables leading to and from the server are tied to this arm. The two hinges enable the cable management arm to swing out of the way when you need to access the system tray. IMPORTANT: For easier handling, slide the server into the rack before attaching the cable management arm to the cable management arm bracket. Attaching the arm before loading the server into the rack may interfere with the loading process. To attach the cable management arm: 1. Identify the cable management arm holes on the outside of the rear of the rack that you marked with the template. Align the end of the cable management arm with the marks on the outside of the rear post of the rack. Insert the tabs on the cable management arm into the marked holes on the interior of the vertical posts on the rear of the rack (1). 2. Align the cable management arm support bracket (screw retaining plate) on the outside of the rack and tighten the thumbscrews to secure it in place (2). Figure 5-14: Attaching the cable management arm to the rear post of the rack HP ProLiant ML530 Generation 2 Server Setup and Installation Guide 5-19