HP Media Center m7200 HP Media Center PC Getting Started Guide - Page 35
Connecting 4.1 Audio Speakers, Output with Sound Effect Manager
View all HP Media Center m7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Step 8 is optional for a two-speaker setup. 8 After the speakers are connected to the PC, configure the audio software for sound output for your PC model: ■ 3 connectors: See "Configuring Audio Output with Multi-channel Sound Manager" on page 42. ■ 6 connectors: See "Configuring Audio Output with Sound Effect Manager" on page 45. ■ Sound card: See "Configuring Audio Output with a Sound Card" on page 47. The following diagram shows a typical 2.1 audio installation: OUT IN OUT Connecting 4.1 Audio Speakers To connect two front speakers, two rear speakers, and a subwoofer for four-channel (4.1 speaker) output: 1 Turn off the PC. 2 . Connect the front speaker cable to the limegreen Audio Line Out connector that matches the back of your PC. 3 Connect the rear speaker cable to the black connector that matches the back of your PC. 3 6 S 3 6 S ■ For 3-connector systems, the blue audio line in connector functions as a rear line out when a multichannel audio configuration is activated. n 3 is three connectors 6 is six connectors S is sound card Configuring Speaker and Sound Options 31