HP Media Center m7200 HP Media Center PC Getting Started Guide - Page 37
Output with Sound Effect Manager on, Always turn on the, PC before you turn on, the speaker system.
View all HP Media Center m7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
4 Connect the center/subwoofer speaker cable to the gold (or pink Mic) connector that matches the back of your PC. 3 6 S 7 Turn on the PC. 8 Plug in the speaker system power. 9 Turn on the speaker system. 10 After the speakers are connected to the PC, configure the audio software for sound output for your PC model: ■ For 3-connector systems, the pink Mic connector functions as a center/subwoofer speaker Line Out when a multichannel audio configuration is activated. 5 Connect the cables to the audio system. 6 Connect the front, rear, and center speakers to the subwoofer. Refer to the speaker documentation. ■ 3 connectors: See "Configuring Audio Output with Multi-channel Sound Manager" on page 42. ■ 6 connectors: See "Configuring Audio Output with Sound Effect Manager" on page 45. ■ Sound card: See "Configuring Audio Output with a Sound Card" on page 47. The following diagram shows a typical 5.1 audio installation: n Always turn on the PC before you turn on the speaker system. OUT IN Configuring Speaker and Sound Options 33