HP Photosmart 635 hp photosmart 630 series digital camera with hp instant shar - Page 80

Problem Possible cause Solution The Power/ The camera Memory light does not blinks as if recognize that the batteries there are no are being batteries recharged, installed. but there are no batteries installed. Do nothing. The blinking is harmless and should stop after 5-30 minutes. The battery You are using This behavior is not uncommon level indicator high-power when you switch between is erratic. For camera modes operating modes that require example, the followed by more power, such as Live View or level goes lower-power video, and operating modes that down quickly camera modes, require less power, such as then goes or you are Playback. In this case, do nothing. back up. using partially discharged batteries that have not been used for awhile. The battery level indicator may also go down quickly if you are using the camera with partially discharged batteries that have not been used for awhile. In this case, replace or recharge the batteries when they are fully drained. 80 hp photosmart 630 series user's manual