HP StorageWorks 8/80 Brocade Access Gateway Administrator's Guide v6.2.0 (53-1
HP StorageWorks 8/80 - SAN Switch Manual
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 8/80 manual content summary:
- HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 1
53-1001189-01 November 24, 2008 Access Gateway Administrator's Guide Supporting Fabric OS 6.2.0 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 2
implied, concerning any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade and product availability. Export of technical data contained in this document may require please visit http://www.brocade.com/support/oscd. Brocade Communications Systems, Incorporated - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 3
53-1000605-04 Access Gateway Administrator's Guide 53-1001189-01 Summary of Changes Publication Date First version January 2007 Added support for the 200E June 2007 Added support for new policies and changes to N_Port mappings. October 2007 Added support for new March 2008 platforms: 300 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 4
iv Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 5
Contents About This Document How this document is organized xiii Supported hardware and software xiii What's new in this document xiv Document conventions Gateway Mode In this chapter 9 Access Gateway policies 9 Showing current policies 9 Access Gateway Administrator's Guide v 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 6
Verifying the switch mode 34 Setting the Fabric OS switch to Native Mode 35 Enabling NPIV on the M-EOS switch 35 vi Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 7
50 Adding F_Ports to an N_Port 50 Removing F_Ports from an N_Port 51 Adding a preferred secondary N_Port 52 Deleting F_Ports from a preferred secondary N_Port 52 Troubleshooting Access Gateway Administrator's Guide vii 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 8
viii Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 9
Access Gateway cascading 31 Initialized ports in Access Gateway 46 Example of adding an external F_Port (F9) on an embedded switch 47 Access Gateway Administrator's Guide ix 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 10
x Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 11
11 Table 12 Fabric OS components supported on Access Gateway 3 Port configurations 5 Description of F_Port-to-N_Port mapping 6 Firmware upgrade and downgrade scenarios 6 Policy enforcement F_Port-to-N_Port mapping 53 Troubleshooting 57 Access Gateway Administrator's Guide xi 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 12
xii Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 13
. • Appendix A, "Troubleshooting" provides symptoms and troubleshooting tips to resolve issues. Supported hardware and software Although running 3.0 (1) and 3.1 (1) or later. Access Gateway supports 4 and 8 Gbit bladed servers and blades. Access Gateway Administrator's Guide xiii 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 14
Supported platforms • Brocade 300 (24-port version only), 5100 • Embedded switches: 5410, 5424, 5480 • Supported Identifies the names of user-manipulated GUI elements Identifies narrative portions of this guide are presented in mixed all lowercase. Otherwise, this manual specifically notes those cases - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 15
An Attention statement indicates potential damage to hardware or data. CAUTION A Caution statement alerts you to situations Fibre Channel, see the Brocade Glossary. The following terms are used in this manual to describe Access Gateway mode and its components. Access Gateway Administrator's Guide - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 16
Access Gateway, the N_Port connects to the Edge switch. NPIV N_Port ID Virtualization. Allows a single Fibre Channel port to appear as multiple, distinct ports providing separate port identification and that you might find helpful. xvi Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 17
, visit the Fibre Channel Industry Association Web site: http://www.fibrechannel.org Optional Brocade features For a list of optional Brocade features and descriptions, see the Fabric OS Administrator's Guide. Getting technical help Contact your switch support supplier for hardware, firmware, and - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 18
the switch or fabric behavior immediately following the problem, and specific questions • Description of any troubleshooting steps already performed and the results • Serial console and Telnet number and your suggestions for improvement. xviii Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 19
the Web Tools Administrator's Guide, the Fabric Manager Administrator's Guide, or the Data Center Fabric Manager User Guide for more information about AG support in those tools. Brocade Access Gateway is a Fabric OS feature that lets you configure your Enterprise fabric to handle additional N_Ports - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 20
devices, Fibre Channel Arbitrated Loop support, FICON, IP over FC, extended fabrics, management platform services, name services (SNS), the Enterprise fabric using the DCC policy or in the Access Gateway module using Advanced Device Security (ADS) policy. The ADS policy secures virtual and physical - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 21
Yes N_Port ID Virtualization Yes Name Server NA Network Time Protocol (NTP) No (no relevance from fabric perspective. In embedded switch, time should be updated by server management utility. Open E_Port NA Performance Monitor Yes (Basic PM only, no APM support) Port Mirroring No - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 22
fabric switches connect to the Enterprise fabric using ISL (InterSwitch Link) ports, such as E_Ports. Following are the Fibre Channel (FC) ports that AG an N_Port to an Edge fabric switch. Using N_Port ID Virtualization (NPIV), AG allows multiple FC initiators to access the SAN Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 23
Connects Access Gateway to a fabric NA N_Ports are not supported. switch. NA ISL is not supported.1 Yes Connects the switch to other mapping, see Table 11 on page 53. If required, you can manually change the default mapping. Figure 3 shows a mapping with eight F_Ports Guide 5 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 24
• Limited to switch platforms and embedded switch platforms listed in "Supported hardware and software" on page xiii. • Maximum number of AGs for upgrading and downgrading Fabric OS versions. TABLE 4 Firmware upgrade and downgrade scenarios Policies Fabric OS v6.2 -> Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 25
or earlier is permitted, but you must disable ADS. Downgrading to v6.1 is allowed and ADS is supported. Automatic Port Configuration policy If you upgrade from Fabric OS v6.0.x or earlier to Fabric OS 6.2.0, you must first disable port grouping. Access Gateway Administrator's Guide 7 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 26
1 Upgrade and downgrade considerations for switches in AG mode 8 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 27
command. switch:admin> ag --policyshow Policy_Description Policy_Name State Port Grouping pg Enabled Auto Port Configuration auto Disabled Advanced Device Security ads Enabled Access Gateway Administrator's Guide 9 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 28
(ADS) policy is supported on AG F_Ports. Fabric virtual, virtual servers can become vulnerable and security becomes an integral part of server IO virtualization can also be done in the Enterprise fabric; the DCC policy in the Enterprise fabric takes precedence over the ADS Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 29
two new devices to the list of allowed devices for ports 3 and 9, use the following syntax: ag--adsadd "F_Port [;F_Port2;...]" "WWN [;WWN2;...]" Access Gateway Administrator's Guide 11 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 30
and F_Ports are evenly distributed across all N_Ports. While the APC is enabled, you cannot manually configure F_Port-to-N_Port mapping. ATTENTION Enabling the APC policy is disruptive to F_Ports and Gateway is connected to multiple fabrics. 12 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 31
policy may not work when attached to M-EOS switches. M-EOS ports should be set to G_Port to prevent problems with port type discovery. Ports 16-47 on the FC8-48 blade may not be used for AG F_Port "Adding an N_Port to a port group" on page 20. Access Gateway Administrator's Guide 13 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 32
to be disabled. The ports mapped to N_1 fail over; F_1 fails over to N_2 and F_2 fails over to N_3. 14 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 33
the --failovershow operand to display the failover setting. switch:admin> ag --failovershow 13 Failover on N_Port 13 is not supported 3. Enter the ag command with the --failoverenable operand to enable failover. switch:admin> ag --failoverenable 13 Failover policy is - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 34
display the failover setting. switch:admin> ag --failovershow 13 Failover on N_Port 13 is supported 3. Enter the ag --failoverdisable operand to disable failover. switch:admin> ag disabled and rerouted to N_2, and then enabled. 16 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 35
switch:admin> ag --failbackshow 13 Failback on N_Port 13 is not supported 3. Enter the ag --failbackenable command with the n_portnumber operand to enable switch:admin> ag --failbackshow 13 Failback on N_Port 13 is supported 3. Enter the ag --failbackdisable command with the n_portnumber operand to - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 36
and 2 are routed through N_Port2 because N_Port2 is in the same port group, pg0. F_Port1 F_Port2 F_Port3 F_Port4 N_Port1 AG PG0 N_Port2 Fabric-1 Fabric-2 Storage Array FIGURE 6 Port Group Zero (pg0) setup 18 Access Gateway Administrator - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 37
N_Port2 AG N_Port3 N_Port4 PG1 Fabric-1 Fabric-2 Storage Array-1 Storage Array-2 FIGURE 7 PG2 Port grouping behavior When a dual redundant fabric configuration is used, F_Ports connected to causing I/O disruption as shown in Figure 8. Access Gateway Administrator's Guide 19 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 38
fails. NOTE If the PG policy is disabled while a switch in AG mode is online, all the user-defined port groups are deleted, but the F_Port-to-N_Port mapping remain unchanged. Creating a port group 1. 13 N_Port[s] are added to the port group 3 20 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 39
--pgshow to verify the Port Group policy is disabled. switch:admin> ag --policyshow AG Policy Policy Name State Port Grouping pg Disabled Access Gateway Administrator's Guide 21 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 40
the module because these are the only ports that connect the Enterprise fabric to an adjacent Edge switch. To use Access Gateway masterless the AG module is to ensure that the ISL Trunking license is installed. Because you must configure the trunking on the Edge switch, F_Port Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 41
masterless trunking; Also, after a trunking license is installed on a switch in AG mode and you change the QSA) Query Security Attributes ELSs are not supported on F_Port trunks. The port must be firmware version earlier than Fabric OS v6.2.0. Access Gateway Administrator's Guide 23 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 42
Upgrading is not disruptive. If you plug in a standby-CP with a firmware version earlier than Fabric OS v6.1.0 and a Trunk Area is present on the , the port cannot be assigned a Trunk Area. FICON is not supported on F_port trunk ports. However, FICON can still run on ports that Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 43
have a Trunk Area assigned to them. Port mirroring Port mirroring is not supported on Trunk Area ports or on the PID of an F_Port trunk port Domain,Index. Two masters is not supported in the same F_Port trunk group. Not currently supported. Access Gateway Administrator's Guide 25 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 44
ports 0-3 in the figure shown below. The Brocade 300 platform supports a trunk group with up to eight ports. The trunking groups are based on the user port number, with contiguous eight ports as one group, such as 8. Enable F_Port trunking. 26 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 45
the porttrunkarea command, enter help porttrunkarea or see the Fabric OS Command Reference. F_Port trunking will not support shared area ports 16 - 47 on the Brocade FC8-48 and FC4-48C blades. The following table 14 F-port Slave 10/13 125 126 Access Gateway Administrator's Guide 27 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 46
36-39 by executing portenable port for each port in the TA. 4. Show switch/port information: switch:admin> switchshow switchName: SPIRIT_B4_01 28 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 47
:16:00:05:1e:41:4b:4d N4 Online F-Port 2 NPIV public 5. Display TA enabled port configuration: switch:admin> porttrunkarea --show enabled Access Gateway Administrator's Guide 29 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 48
disabled for ports 36, 37, 38 and 39. F_Port Trunking monitoring For F_Port masterless trunking, you must install Filter, EE or TT monitors on the F_Port trunk port. Whenever the master port changes, it is describes Access Gateway cascading. 30 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 49
Policy (ADS) on the AG F_Ports that are directly connected to the servers. • APC policy is not supported when cascading. • Loopbacks (Core AG N_port to Edge AG F_Port) are not allowed. • The agshow command will be shown for the Core AG switch. Access Gateway Administrator's Guide 31 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 50
2 Access Gateway Cascading 32 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 51
with the following firmware versions: • M- supported if a switch in AG mode is connected to an external switch. Loop devices and FICON channels/control unit connectivity are not supported Install and configure the switch as described in the switch's Hardware Reference Manual Guide 33 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 52
• Use only WWN zoning throughout the fabric. Access Gateway does not support domain ID and other types of zoning schemes. • Include the Access OS fabric, disable the Fabric OS Management Server Platform Service. Verifying the switch mode 1. Connect to the switch 's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 53
1. Connect to the switch and log in as admin on the M-EOS switch. 2. Enable the MS services by entering the following command: config OpenSysMs setState 3. Enable NPIV functionality on the Edge fabric ports so that used by switches in AG mode. Access Gateway Administrator's Guide 35 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 54
using Emulex HBAs or any other HBAs that are not based on QLogic FC ASIC technology, ensure that N_Port ID Virtualization (NPIV) is enabled on the Cisco switch and that the switch is running SAN-OS 3.0 (1) or SAN switch in Access Gateway mode. 36 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 55
switch to a switch in AG mode if there are no FC target devices, such as storage arrays on the Cisco switch. You can do this by editing the Company ID List or by :60:B0 00:E0:79 00:0D:60 + - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 56
the original default list) Total company ids 6 + - Additional user configured company ids * -Explicitly deleted company ids from default list. Ensure that the debug FLOGI mode is not enabled; Cisco does not support NPIV when FLOGI debug is set. Run the show debug flogi command Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 57
+ - Additional user configured company ids * -Explicitly deleted company ids from default list. NOTE You can also use the Persistent FCID field in the Cisco GUI tool to manually assign the FCIDs to the switch meets the AG routing requirements. Access Gateway Administrator's Guide 39 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 58
and restoring the configuration file, refer to the Fabric OS Administrator's Guide. Enabling AG mode is disruptive; the switch is disabled and rebooted. through AG depends on the maximum number of local devices that are supported by Fabric OS. Enabling Access Gateway mode Ensure that no zoning or - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 59
not receiving light Receiving light but out of sync Receiving light and in sync Module is signaling a laser fault Port marked faulty Access Gateway Administrator's Guide 41 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 60
reference signal Running diagnostics Connection not established (only for virtual ports) The port is up and running Disabling Access on reconfiguring a switch and joining it to a fabric, see the Fabric OS Administrator's Guide. 1. Connect to the switch and log in as admin. 2. Enter the ag --modeshow - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 61
to revert to the previous configuration. 4. Enter the switchEnable command to bring the switch back online. The switch automatically joins the fabric. Access Gateway Administrator's Guide 43 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 62
3 Rejoining switches to a fabric 44 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 63
the role of securityadmin, admin, or user to configure AG. To ensure that all an F_Port of an Edge switch that supports NPIV (N_Port ID Virtualization). • Disabled (offline) if the d. Access Gateway converts the FDISC Accept link service reply (ACC) response to the host as Guide 45 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 64
the fabric, Fibre Channel ports operate as either a target or as an initiator. Fibre Channel ports target is connected to an Enterprise fabric switch that supports NPIV. NPIV capability should you must manually disable the N_port on the Access Gateway. See the Fabric OS Administrator's Guide for more - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 65
N_Port mode. switch:admin> portcfgnport 10 0 Alternatively, to lock a port in N_Port mode, enter the portcfgnport 1 command. switch:admin> portcfgnport 10 1 Access Gateway Administrator's Guide 47 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 66
Access Gateway. Access Gateway connects only FCP initiators and targets to the fabric. It does not support other types of ports, such as ISL (interswitch link) ports. The port types on a fabric Grouping policy is enabled (1) or disabled (0). 48 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 67
10:00:00:05:1e:35:10:1e 0x5a0000 NOTE For a description of the port state, see Table 10 on page 41. Access Gateway Administrator's Guide 49 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 68
) 7 7 cu AN No_Sync 8 8 cu AN No_Sync 9 9 cu AN No_Sync 10 10 -- N4 No_Module 11 11 -- N4 No_Module 12 12 -- N4 No_Module 50 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 69
list. switch:admin> ag --mapshow 13 N_Port : 13 Failover(1=enabled/0=disabled) : 1 Failback(1=enabled/0=disabled) : 1 Current F_Ports : None Configured F_Ports : 7 PG_ID : 0 PG_Name : pg0 Access Gateway Administrator's Guide 51 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 70
. Port numbers must be separated by a semicolon, for example: switch:admin> ag --prefdel "3;9" 4 Preferred N_Port is deleted successfully for the F_Port[s] 52 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 71
to 19 11, 12 mapped to 20 5, 6 mapped to 21 13, 14 mapped to 22 7, 8 mapped to 23 15, 16 mapped to 0 Access Gateway Administrator's Guide 53 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 72
19 11, 12 mapped to 20 15, 16 mapped to 0 5, 6 mapped to 21 13, 14 mapped to 22 7, 8 mapped to 23 54 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 73
36 20, 21, 22, 23 mapped to 37 24, 25, 26, 27 mapped to 38 28, 29, 30, 31 mapped to 39 Access Gateway Administrator's Guide 55 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 74
4 Port configurations 56 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 75
Appendix A This appendix provides troubleshooting instructions. TABLE 12 Problem Troubleshooting Cause Solution Switch is not in Access Gateway mode NPIV disabled on Edge twisted cable, or bent cable. Replace the cable and try again. Access Gateway Administrator's Guide 57 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 76
TABLE 12 Problem Troubleshooting (Continued) Cause Failover is not Failover) on N_Port is supported." If it returns, "Failback (or Failover) on N_Port is not supported." See "Adding a preferred secondary command. 58 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 77
, 40 port initialization, 45 port types, 4 saving configuration, 42 supported firmware versions, 33 terms, xv ACL policies, settings, 34 adding devices area assignment, 23 authentication, limitations, 23 Access Gateway Administrator's Guide 53-1001189-01 B behavior, failover policy, 17 C Cisco - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 78
43 logins, 34 Management Server Platform, 34 zoning scheme, 34 Fabric OS Management Server Platform Service settings, 34 failback policy example, 14, 16 failover policy disabling, 16 enabling, 15 example trunk ports, 24 H HA sync, TA present, 24 Access Gateway Administrator's Guide 53-1001189-01 - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 79
unlock, 47 unlocking, 47 native mode setting, 35 Access Gateway Administrator's Guide 53-1001189-01 non disruptive, 24 NPIV Edge switch, 33 enable with , 46 enabling on Cisco switch, 36 enabling on M-EOS switch, 35 support, 33 O optional features, xvii P Policies Access Gateway, 9 Advance Device - HP StorageWorks 8/80 | Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 80
, 34 FLOGI, 34 inband queries, 34 Management Server Platform, 34 zone, no access, 43 supported hardware and software, xiii switch mode, verify, 34 switchMode Access Gateway mode, 40 Native, 34 enabled, 7 Z zoning schemes, 34 setting, 43 62 Access Gateway Administrator's Guide 53-1001189-01
53-1001189-01
November 24, 2008
Access Gateway
Administrator’s Guide
Supporting Fabric OS 6.2.0