HP StorageWorks 8/80 Brocade Access Gateway Administrator's Guide v6.2.0 (53-1 - Page 61
Rejoining switches to a fabric, Reverting to a previous configuration
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Rejoining switches to a fabric 3 Rejoining switches to a fabric After a switch reboots and AG mode is disabled, the Default zone is set to no access. Therefore, the switch does not immediately join the fabric to which it is connected. Use one of the following methods to re-join a switch to the fabric: • If you saved a Fabric OS configuration before enabling AG mode, download the configuration using the configDownload command. • If you want to re-join the switch to the fabric using the fabric configuration, use the following procedure. 1. Connect to the switch and log in as admin. 2. Enter the switchDisable command to disable the switch. 3. Enter the defZone --allAccess command to allow the switch to merge with the fabric. 4. Enter the cfgSave command to commit the defzone changes. 5. Enter the switchEnable command to enable the switch and allow it to merge with the fabric. The switch automatically re-joins the fabric. Reverting to a previous configuration 1. Connect to the switch and log in as admin. 2. Enter the switchDisable command to disable the switch. 3. Enter the configDownload command to revert to the previous configuration. 4. Enter the switchEnable command to bring the switch back online. The switch automatically joins the fabric. Access Gateway Administrator's Guide 43 53-1001189-01