HP Surestore 28/48-Slot with DLT7000 Digital Linear Tape SCSI-2 Drive and SCSI - Page 142
IPMB Message status, Gateway address
View all HP Surestore 28/48-Slot with DLT7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Library SCSI-3 Command Set Read Buffer Command (3CH) IPMB Message status: See Table 2-68 on page 2-87. Board status: Current status of the controller board. See Table 2-69 on page 2-88. Board type: The type of controller (10H = remote management). See Table 2-70 on page 2-88. Been setup: Set if the controller has been given its setup variables. Controller number: Controller number of the above type (i.e., controller 0 of type remote management). IP addr valid: 1 = information in IP Address is valid; 0 = not valid. Subnet valid: 1 = information in subnet address mask is valid; 0 = not valid. Gateway valid: 1 = information in gateway address is valid; 0 = not valid. MAC addr valid: 1 = information in the MAC address is valid; 0 = not valid. Net connect valid: 1 = Net connect information is valid; 0 = not valid. IP address: The IP address of the remote management card. Subnet address mask: The subnet address mask for the remote management card. Gateway address: The gateway address for the remote management card. MAC address: The MAC address for the remote management card. 100bT Capable: Set to 1 if the remote management card is 10/100 capable. DHCP information: 0 = Not DHCP capable; 1 = DHCP capable, DHCP connection not attempted; 2 = DHCP capable, DHCP connection attempted but failed; 3 = DHCP capable, DHCP connection attempted and successful. Net connect information: 0 = Not connected to a network; 1 = Connected to a network at unknown speed; 2 = Connected to a network at 10bT speed; 3 = Connected to a network at 100bT speed. Board revision: 0 = 10bT board with 850 processor; 1 = 10bT/100bT 2- 98 Chapter 2