HP Surestore 28/48-Slot with DLT7000 Digital Linear Tape SCSI-2 Drive and SCSI - Page 263

Library Error Codes Diagnostic Tests Table 3-6 Diagnostic Tests Test Test Number Description Clear Soft Logs 26 Clear Hard Logs 29 Find Plunge Home 101 Find Vertical Home 102 Find Lateral Home 103 Test Transport Comm 196 Show All Sensors 197 Demonstration 100 Clears all historical data from the Soft Error (recoverable error) Log. Clears all historical data from the Hard Error (unrecoverable error) Log. This test clears any "Hard Error" indicator on the front panel display status bar. Moves the transport to the back of the transport assembly. Moves the transport to the bottom of the transport assembly. Moves the transport to the extreme left side of the library and then locates slot 2. Exercises the infra-red communications path between the library controller and the transport micro-controllers. Reports the health of this link. If the test passes, the Test IR Communication link is good. Dynamically displays the state of sensors. Toggle door sensors opens and closes the doors. Toggle mailslot sensor opens the mailslot to allow access to the first two tapes. NOTE: Available through the front panel only. CAUTION: Run an inventory check from the host backup application after performing this test. Selects a random full storage slot, moves the tape to the drive, and repeats the process until all drives are full. The program locates a full slot, a full drive, an empty slot, and then performs an exchange. Chapter 3 3- 29