HP Surestore 28/48-Slot with DLT7000 Digital Linear Tape SCSI-2 Drive and SCSI - Page 237
Request Sense Keys, Table 3-1, Request Sense - Sense Key Values - Byte 2, Bits 3 through 0, Sense
View all HP Surestore 28/48-Slot with DLT7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
Library Error Codes Request Sense Keys Request Sense Keys Table 3-1 Request Sense - Sense Key Values - Byte 2, Bits 3 through 0 Sense Key 00H 01H 02H 03H 04H 05H 06H 0BH Name Abrev. Description No Sense NS Recovered RE Error Not Ready NR Medium Error ME Hardware HE Error Illegal Request IR Unit Attention UA Aborted AC Command The command completed successfully. The last command was completed successfully with some recovery action performed by the library/controller. The library cannot be accessed. The command terminated with an unrecovered error condition that was caused by a tape defect. The library/controller detected a hardware error. There was an illegal parameter in the command descriptor block or in the additional parameters supplied for some commands. The tape has been loaded, the unit has been reset, or the Mode Select parameters have been changed. This sense key shall be reported if a target or LUN receives a second command from the same initiator before the previous command from that initiator has completed. Chapter 3 3- 3