HP Surestore 28/48-Slot with DLT7000 Digital Linear Tape SCSI-2 Drive and SCSI - Page 96

Library SCSI-3 Command Set Mode Sense (6) Command (1AH) Table Abbreviations • MT = Medium transport element (picker) • ST = Storage element • IE = Import/Export element (mailslot) • DT = Data transport element In the descriptions below, XX and YY are abbreviations of the element types such as MT or ST. StorXX When this bit is set to 1, the XX element type provides independent storage for a cartridge. If the StorXX bit is set to 0, it indicates that elements of that type provide virtual sources or destinations, and the storage location of the cartridge is provided by an element of some other type. XX->YY - Move Medium A returned bit value of 1 indicates that the library supports Move Medium commands from the XX (source) element to the YY (destination) element. See Table 2-127 on page 2-167 for additional information on the Move Medium command. A returned bit value of 0 indicates that Move Medium commands from the XX element to the YY element are not supported and will be rejected, with "Illegal Request." XXYY - Exchange Medium A returned bit value of 1 indicates that the library supports Exchange Medium commands where the source is element type XX and destination 1 is element type YY, and destination 2 is of the same type as the source element. An XXYY field returned bit value of 0 indicates that these Exchange Medium commands will be rejected with "Illegal Request.'' See Table 2-128 on page 2-168 for additional information on the Exchange Medium Command. 2- 52 Chapter 2