HP Surestore 28/48-Slot with DLT7000 Digital Linear Tape SCSI-2 Drive and SCSI - Page 150

Device # vendor ID, Device # OLR Status

Page 150 highlights

Library SCSI-3 Command Set Read Buffer Command (3CH) = synch 5 Mbytes; 2 Fast 10 Mbytes; 3 = Ultra 20 Mbytes; 7 = Unknown. Device # SCSI ID: Device # SCSI target ID. Device type: 0 = library; 1 = DLT7000; 2 = DLT8000; 3 = Ultrium LTO; 4 = DLT1 (Benchmark). Device # OLR Status: 0 = Drive invalid 1 = Online good 2 = Online pending 3 = Offline failed pending 4 = Offline failed 5 = Offline good pending 6 = Offline good 7 = Offline missing 8 = Offline library 9 = Offline missing library Device # serial number: Serial number of device, ASCII string padded at end with zeros. Device # vendor ID: The vendor ID of the drive. 8-byte ASCII string padded a the end with zeros. Link address: The link address of the fibre channel board (AL_PA or FLA). Bypass/active: 1 = Fibre transceiver is in loopback; 0 = Fibre transceiver is able to connect to an outside link. Link up: 0 = link not detected; 1 = link detected. Link init status: 0 = Initialization pending; 1 = Initialization failed; 2 = Initialization successful. Addr mode: Address mode: 0 = hard; 1 = soft; 2 = firm. Connection: Connection type. 0 = none; 1 = loop; 2 = fabric. Worldwide name (WWN): A unique registered name that is given to each fibre channel board. PAL revision: PAL's revision. Board Revision: 0 = The HVD 509 board; 3 = The LVD 519 board; 4 = The HVD 529 board; 5 = The LVD high-performance 539 board; 6 = The HVD high-performance 549 board. Bus # fault: 1 = SCSI bus # has a fault; 0 = no fault. 2- 106 Chapter 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302

2-106
Chapter 2
Library SCSI-3 Command Set
Read Buffer Command (3CH)
= synch 5 Mbytes; 2 Fast 10 Mbytes; 3 = Ultra 20 Mbytes; 7 = Unknown.
Device # SCSI ID
: Device # SCSI target ID.
Device type:
0 = library; 1 = DLT7000; 2 = DLT8000; 3 = Ultrium LTO;
4 = DLT1 (Benchmark).
Device # OLR Status
:
0 = Drive invalid
1 = Online good
2 = Online pending
3 = Offline failed pending
4 = Offline failed
5 = Offline good pending
6 = Offline good
7 = Offline missing
8 = Offline library
9 = Offline missing library
Device # serial number
: Serial number of device, ASCII string padded
at end with zeros.
Device # vendor ID:
The vendor ID of the drive. 8-byte ASCII string
padded a the end with zeros.
Link address
: The link address of the fibre channel board (AL_PA or
FLA).
Bypass/active:
1 = Fibre transceiver is in loopback; 0 = Fibre
transceiver is able to connect to an outside link.
Link up
: 0 = link not detected; 1 = link detected.
Link init status
: 0 = Initialization pending; 1 = Initialization failed; 2 =
Initialization successful.
Addr mode
: Address mode: 0 = hard; 1 = soft; 2 = firm.
Connection
: Connection type. 0 = none; 1 = loop; 2 = fabric.
Worldwide name (WWN):
A unique registered name that is given to
each fibre channel board.
PAL revision:
PAL’s revision.
Board Revision
: 0 = The HVD 509 board; 3 = The LVD 519 board; 4 =
The HVD 529 board; 5 = The LVD high-performance 539 board; 6 = The
HVD high-performance 549 board.
Bus # fault:
1 = SCSI bus # has a fault; 0 = no fault.