HP Surestore 28/48-Slot with DLT7000 Digital Linear Tape SCSI-2 Drive and SCSI - Page 261

Library Error Codes Diagnostic Tests Diagnostic Tests The following tables describe the tape library diagnostic tests. CAUTION Some diagnostic tests can result in a tape cartridge being placed into an improper storage slot. If this happens, the tape library file system is no longer accurate. Table 3-6 Diagnostic Tests Test Test Number Description Check Inventory 10 Recalibrate Library 5 Test Vertical Motion 12 Test Lateral Motion 13 Test Magazine Swaps 15 Wellness Test 16 Physically scans the entire library to determine which slots contain tapes and if the drives contain tapes. Performs the power-up self-tests. Each test runs one time per test loop. This test recalibrates the mechanics and clears any hard error. Moves the vertical assembly to the bottom of the library, then to the top, while the transport moves around its lateral range. Upon completion of these moves, the transport assembly then stops. NOTE: This test is functional in all library models, but only moves upward in multi-level libraries. Moves the transport assembly to a random slot. No tape is required. Moves a tape from a random slot to an empty, random slot, and then returns it to the original location. Moves a tape from a random slot to an empty drive, repeats the process until all drives are full, and then returns all tapes to their original slots. Chapter 3 3- 27