JVC KY-F70BU Instruction Manual - Page 10

1. Introduction Features ● This digital camera uses three 1.45 million pixel 1/2 inch 3-CCD. ● Newly developed 1/2 inch C mount Dichroic prism for the colour separation prism. ● The semi-animation of 1360 × 1024 pixels can be output with analog signal (7.5 frames/sec- ond) and the still picture of 1360 × 1024 pixels can be captured. ● Image capturing capability using a capture board since video signals are processed in real- time by the built-in DSP and outputted as RGB analog signals of 7.5 frames/sec. ● Monitor output can be scan-converted to 640 × 480 pixels for output to a VGA monitor. ● Using the provided special application software [KY-SCSI] allows connection of a personal computer via SCSI connection for remote control, display of preview image and capture of still images. ● Output digital still images to an MO drive, Zip® drive or compatible printer using SCSI connection. ● Remotely control your PC using RS-232C connection. (software not included) Accessories and attachments CR2025 Power cable (2 m) For connecting with AC adapter 8-pin cable ( ੬ page 18) Remote plug (10-pin) REMOTE terminal plug ( ੬ page 12) Battery (CR2025) For time and date backup ( ੬ page 16) Replace the battery once two year. Clamp filter For power cable ( ੬ page 18) Instruction book E6 Mini screwdriver For replacing battery ( ੬ page 16) Wire clamp (5 units) For clamping rear cables, etc. Floppy disk (3 disks) Special application software [KY-SCSI] and TWAIN driver For details, see the "Readme.txt" file of the software ( ੬ page 66)