JVC KY-F70BU Instruction Manual - Page 47

Outputting negative images It is possible to change the video signal which is output from the camera via MONITOR terminal from positive to negative video. MENU DOWN UP MODE/SET 1. Press the MODE button to enter the REC mode (REC lamp on), then press the MENU button for at least 2 seconds to display the REC MENU screen. SCSI REC SEND AW/SEL MODE MENU UP DOWN SET PLAY FREEZE MONITOR LENS REMOTE ON 1 2 3 4 DC IN POWER SEE INSTRUCTION MANUAL REC lamp MONITOR terminal - - - REC MENU - - - 1 : EXPOSURE . . 2 : WH I TE BA L ANCE . . 3 : FREEZE . . 4 : PROCESS . . 5 : SYSTEM SET T I NG . . REC MENU screen Menu item Set value - - - SYSTEM SET T I NG - - - ON SCREEN : MEMORY NUM FRZ D I S PLAY : O N PR IOR I T Y :D I S K MON I TO R :F INE AREA : NAR ROW BAR LEVEL : 0.7 V NEGA : ON SYNC ON G : OF F MENU RESET . . V I DEO MEMORY CL EAR . . T I ME AD J UST SYSTEM SETTING screen 2. Use the UP or DOWN button to select 5. SYSTEM SET- TING (displayed in purple when selected), then press the SET button. The SYSTEM SETTING screen will appear. 3. Press the UP or DOWN button to select NEGA (NEGA will be displayed in purple when selected), then press the SET button. The set value will be displayed in purple, indicating that it can be changed. 4. Press the UP or DOWN button to set the value to ON. The outputted image will be the negative image. 5. Pressing the SET button will register the setting to the memory. MEMO Pressing the MENU button without pressing the SET button will return the unit to its previous settings without confirming the changes. 6. Press the MENU button twice to return to the normal screen. E43