JVC KY-F70BU Instruction Manual - Page 60
PROCESS 1/3 screen continued
View all JVC KY-F70BU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
6. Menu screen settings (continued) PROCESS (1/3) screen (continued) Menu item GAMMA LEVEL NOISE SUP. Function/variable range Default value Used to set whether the gamma curve to determine the reproduction of black is to be the standard value or customised. NORMAL: the gamma curve is set using the standard value (0.45) ADJUST: set when changing the gamma curve NORMAL The gamma curve can be adjusted only when GAMMA is 0.45 set to ADJUST. Increase the number: Improves the gradation of bright areas. However, the gradation of black becomes poorer. Decrease the number: Improves the gradation of black areas. However, the gradation of bright areas becomes poorer. [Variable range: 0.35 ~ 1.00 (21 steps)] Used to reduce noise in the video signal. OFF : Noise reduction is not performed. LOW/MIDDLE/HIGH : Noise reduction is performed. Amount of reduction is increased in the order of LOW → MIDDLE → HIGH. OFF MEMO Note that details in fine sections of the image may get lost as the noise reduction amount is increased. MASTER BLACK Used to adjust the pedestal level (master black), which is 0 normally set to zero which is the standard black of the capped lens. To see more detail in black area, increase the pedestal level which brightens the entire screen. Increase the pedestal level: increase the number Decrease the pedestal level: decrease the number [Variable range: -99 ~ 99] E56