JVC KY-F70BU Instruction Manual - Page 63
SYSTEM SETTING screen
View all JVC KY-F70BU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
SYSTEM SETTING screen Menu item ON SCREEN Function/variable range Default value Used to set the text which is displayed in the video signal MEMORY output to the MONITOR terminal. NUM ALC EEI: displays the ALC and EEI status during REC mode and the iris value during AUTO IRIS mode. MEMORY NUM: displays the memory image number during the PLAY mode. BOTH: displays both conditions during REC mode, and displays memory image number during PLAY mode. OFF: no text is displayed for either REC mode or PLAY mode. MEMO "----" is shown in cases when ALC, EEI, and AUTO IRIS all fail to function. FRZ DISPLAY PRIORITY MONITOR Used to set whether to display FREEZE on the screen ON when in operation. ON: displays FREEZE on the screen OFF: no display Used to set which device has output priority when both printer and MO or Zip® drive are connected. PRINTER: output priority is given to the printer. DISK: output priority is given to the MO or Zip® drive. DISK Use to set the resolution of the image displayed on the FINE monitor in the VGA mode. FINE: 640 × 480 pixels (the image is updated 7.5 times per second) DRAFT: 640 × 240 pixels (however, the image is updated 30 times per second) MEMO • This menu item cannot be selected when the unit is set the SXGA mode using the dip switches located on the rear is displayed) • When set to DRAFT, it automatically switches to the FINE mode when the following settings are made, and returns to the original setting when set to a setting other than the following. When the shutter mode is set to RANDOM. When the shutter speed is set to 1.4 s or slower. • When switching between FINE and DRAFT, the image shown on the screen may be disturbed momentarily. E59