JVC KY-F70BU Instruction Manual - Page 75
Specifications
View all JVC KY-F70BU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Specifications Imaging device: Scanning type: Available pixels: Effective no. of pixels: Colour separation: Aspect ratio: V.SCAN speed: Detail compensation: Lens mount: Analog output: Output signals: (Select from a, b or c) Synchronization: Sync signal output: SCSI output: Output modes: Built-in framestore capacity: Operating temperature range: Input voltage: Power consumption: Mass: 1/2 inch IT CCD × 3 Progressive 1.45 million pixels (1392 (H) × 1040 (V)) 1360 × 1024 Dichroic prism Approx. 4:3 1/30 s to 1/5906.8 s both H and V dual-edged C mount R/G/B signal: 0.7V (p-p), 75 Ω a 1360 × 1024 pixels, 7.5 frames/sec. b 640 × 480 pixels, 60 frames/sec. (refresh rate: 7.5 frames/sec., vertical resolution of 480 lines) c 640 × 280 pixels, 60 frames/sec. (refresh rate: 30 frames/sec., vertical resolution of 240 lines) internal Hs, Vs 3.3V (p-p) negative polarity or SYNC ON GREEN 0.3V (p-p) SCSI-2, 50-pin half-pitch SCSI connector Can switch between target and initiator 5 incompressed images at SXGA resolution or 4 when output signal is a 0°C to 40°C (with humidity of less than 80%RH) DC 12V Max. 15W Approx. 850g Connectable PC models: PC/AT compatible machines (DOS/V) complying with the following conditions. Item CPU OS Memory Hard disk SCSI board Video board When using KY-SCSI When using TWAIN driver Pentium® 133 MHz or higher Pentium® 166 MHz or higher Windows® 95 (OSR2)/98/NT4.0 64 MB or more built-in 32 MB or more built-in (64 MB or more recommended) 20 MB or more empty space 100 MB or more empty space Adaptec Inc. AHA-2940AU Resolution of 800 x 600 or higher, full-color display (Video RAM 4 MB or more recommended) E71