JVC KY-F70BU Instruction Manual - Page 41

Playing back images from the memory It is possible to play back images stored in the camera's memory. When in the VGA mode, images will be displayed in 640 × 480 pixels, regardless of whether in the FINE or DRAFT mode. SEL MODE SCSI REC SEND AW/SEL MODE MENU UP DOWN SET PLAY FREEZE MONITOR LENS REMOTE ON 1 2 3 4 DC IN POWER SEE INSTRUCTION MANUAL PLAY lamp 1. Press the MODE button to enter the PLAY mode. The PLAY lamp will light and the latest image stored will be displayed on the monitor. ( ੬ page 10 MODE button) ● At this time, the memory image no. will be displayed at the lower right corner of the screen. MEMO • It is not possible to enter the PLAY mode directly from the FREEZE mode. First cancel the freeze before entering the PLAY mode. • The character display contents of the monitor screen can be changed by selecting ON SCREEN in the SYSTEM SETTING screen. ( ੬ Page 59) 2. Pressing the SEL button will switch in sequence from latest image to the previously Stored images. 3. Images can also be output from memory to an MO/Zip® drive or printer. ( ੬ page 38 Saving images from the memory to an MO/Zip® disk ) ( ੬ page 39 Outputting images from the memory to a printer ) Returning to the REC mode MODE SCSI REC SEND AW/SEL MODE MENU UP DOWN SET PLAY FREEZE MONITOR LENS REMOTE ON 1 2 3 4 DC IN POWER SEE INSTRUCTION MANUAL To return to the REC mode after displaying captured images, press the MODE button to light up the REC lamp. REC lamp E37