JVC KY-F70BU Instruction Manual - Page 61

PROCESS (2/3) screen Menu item FLARE (R) FLARE (B) ABL LEVEL PIXEL COMP. PIXEL CHECK Function/variable range Default value Rch compensation of the black level when flaring effect 0 occurs and the entire screen becomes washed out from the light entering the lens reflecting diffusely. Perform this function along with FLARE (B). Deeper red: increase the number Paler red: decrease the number [Variable range: -128 ~ 127] Bch compensation of the black level when flaring effect 0 occurs and the entire screen becomes washed out from the light entering the lens reflecting diffusely. Perform this function along with FLARE (R). Deeper blue: increase the number Paler blue: decrease the number [Variable range: -128 ~ 127] Used to set whether to automatically adjust the black level of the video when recording. Adjust when the black level of the video during recording fluctuates. NORMAL: executes ABL (Auto Black Level) adjustment using a fixed value. ADJUST: the compensation of the ABL adjustment can be changed using the LEVEL submenu item below. NORMAL The black level can be adjusted only when ABL is set to 0 ADJUST. Decrease the black level (higher compensation): increase the number Increase the black level (lower compensation): decrease the number [Variable range: -25 ~ 25] Setting for deciding whether or not white spot compensation should be performed. OFF: White spot compensation is not performed. ON: White spot compensation is performed. (੬ page 34) OFF For detection of positions of white spots. (੬ page 34 White spot compensation) E57