JVC KY-F70BU Instruction Manual - Page 14
Part names and their functions continued
View all JVC KY-F70BU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
1. Introduction (continued) Part names and their functions (continued) [Rear (continued)] Ventilation hole SCSI REC SEND AW/SEL MODE MENU UP DOWN SET PLAY FREEZE MONITOR LENS REMOTE ON 1 2 3 4 DC IN POWER SEE INSTRUCTION MANUAL ¾ MODE/SET button ● [MODE] Pressing this button each time will switch between the REC (record)* and PLAY (playback) modes. * REC mode is the condition which the unit has either captured an image or is ready to write an image to the main unit memory. MEMO The default mode when the power is turned on is REC. If this button is pressed in the condition in which there is no playback image stored in the memory, "NO PICTURE" is displayed. Recording images to the main unit memory ( ੬ page 36) Playing back images from the memory ( ੬ page 37) ● [SET] While the menu screen is being displayed, use this button to select a submenu or confirm a selected item or set value. Setting in the menu screen ( ੬ page 46) E10 µ REC display lamp This lamp lights when in the REC* mode. During FREEZE, this display lamp will flash. * During the REC mode, camera images are outputted to the MONITOR terminal. Pressing the FREEZE button at this time will save the image to the main unit memory. Recording images to the main unit memory ( ੬ page 36) ¸ PLAY display lamp This lamp lights when in the PLAY* mode. * During the PLAY mode, images saved in the main unit memory are played back by outputting to the MONITOR terminal. Playing back images from the memory ( ੬ page 37)