JVC KY-F70BU Instruction Manual - Page 64
SYSTEM SETTING screen continued
View all JVC KY-F70BU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
6. Menu screen settings (continued) SYSTEM SETTING screen (continued) Menu item MONITOR AREA BAR LEVEL NEGA SYNC ON G Function/variable range Default value NARROW Used to select the image range to be displayed on the monitor in the VGA mode. NARROW : About 94% of the entire image's vertical and horizontal range is displayed. FULL : Almost 100% of the entire image is displayed. MEMO • When set to FULL, the display of the image at the time of FREEZE is delayed. Also, diagonal lines in the monitor image may appear jagged. • No matter which setting is selected, the resolution of the actual recorded image remains unchanged at 1360 × 1024. Used to set the level of the colour bar signal output from the MONITOR terminal of this unit. 0.7V: outputs 0.7V colour bar signals 0.58V: outputs 0.58V colour bar signals 0.7V It is possible to change the output signals to the MONITOR terminal to negative signals. ON: outputs negative signals OFF: does not output negative signals OFF Used to set whether or not a synchronizing signal should be superimposed on the green (G) channel of the video signal output through the MONITOR output terminal. OFF: Synchronizing signal not superimposed. ON: Synchronizing signal superimposed. MEMO • MENU RESET does not return this setting to default value. • Even when this setting is set to OFF, the synchronizing signal can be superimposed on the G channel by turning ON the unit while the SET button is pressed. (Released when the power is turned off.) OFF MENU RESET Initializes all menu screen settings other than the time and date and SYNC ON G item. Resetting settings ( ੬ page 64) VIDEO MEMORY Clears all images stored in the main unit memory. CLEAR Clearing all images from the memory ( ੬ page 40) TIME ADJUST Calls the time and date setting screen. Setting the time and date ( ੬ page 26) E60