JVC KY-F70BU Instruction Manual - Page 34

3. Settings and adjustments for recording (continued) White balance adjustment Since the colour of light (light temperature) changes depending on the light source, readjust the white balance (AUTO WHITE) when the light source of the object changes. MENU DOWN UP MODE/SET SCSI REC SEND AW/SEL MODE MENU UP DOWN SET PLAY FREEZE MONITOR LENS REMOTE ON 1 2 3 4 DC IN POWER SEE INSTRUCTION MANUAL REC lamp - - - REC MENU - - - 1 : EXPOSURE . . 2 : WH I TE BA L ANCE . . 3 : FREEZE . . 4 : PROCESS . . 5 : SYSTEM SET T I NG . . REC MENU screen Menu item Set value - - -WHI TE BA LANCE - - - COLOR TEMP : 3 2 0 0 K WH I TE BA L : AUTO LEVEL ( R ) :0 LEVEL ( B ) :0 SHADING MODE : OF F LEVEL ( R ) : LEVEL ( G ) : LEVEL ( B ) : WHITE BALANCE screen E30 1. Press the MODE button to enter the REC mode (REC lamp on), then press and hold the MENU button for at least 2 seconds to display the REC MENU screen. ( ੬ page 10 MODE button) (If the button is pressed for less than 2 seconds, the REC MENU (QUICK) screen will appear. ੬ Page 49) 2. Press the UP or DOWN button to select 2. WHITE BAL- ANCE (the text will be displayed in purple when selected), then press the SET button. The WHITE BALANCE screen will appear. 3. Press the UP or DOWN button to select COLOR TEMP (the text will be displayed in purple when selected), then press the SET button. The set value will be displayed in purple, indicating that it can be changed. 4. Press the UP or DOWN button to select the setting de- pending on the usage environment. 3200K: when using low temperature lighting such as a halogen lamp, etc. 5200K: when using high temperature lighting under the sunlight, etc. Pressing the SET button will register the setting in the main unit memory. The set value will be displayed in white. MEMO Pressing the MENU button without pressing the SET button will not register the set value and the unit will return to the setting prior to the change. 5. Press the UP/DOWN and SET buttons to set WHITE BAL in the WHITE BALANCE screen to AUTO. 6. After pressing the MENU button twice to return to the normal screen, place a white object with the same lighting conditions as the object to record, then zoom in to display white near the center of the screen (more than 80% area of screen).