JVC KY-F70BU Instruction Manual - Page 15
FREEZE button
View all JVC KY-F70BU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
¹ FREEZE button While in the REC mode, press this button to capture a still image (freeze) of the images being outputted through the MONITOR terminal. At the same time, the still image is saved to the main unit memory. Pressing this button once more will cancel the still image and return to the camera images. Saving images to the main unit memory ( ੬ page 36) MEMO You can also set the unit to automatically cancel the still image. FREEZE screen, CANCEL item ( ੬ page 55) Ƹ MONITOR output terminal (D-sub 15-pin, female) Used to connect to a VGA monitor or SXGA compatible capture board. The default setting is set to VGA monitor compatible. To change the setting from VGA mode to SXGA mode, change the dip switch settings. Pin configuration of connectors ( ੬ page 13) Setting the monitor ( ੬ page 24) ● When in the SXGA mode, images of 1360 × 1024 pixles (7.5 frames/sec.) are outputted. ● For the VGA mode, you can select between the FINE mode of 640 × 480 pixels (7.5 frames/sec.) or DRAFT mode of 640 × 240 pixels (30 frames/sec.) in the menu screen. Setting the VGA mode ( ੬ page 25) ƹ LENS connection terminal Used to connect the lens cable. Pin configuration of connectors ( ੬ page 12) Mounting the lens ( ੬ page 17) ƺ POWER display lamp This lamp lights when the power of the main unit is on. ƻ DC IN power input terminal (Mini DIN 8-pin, female) Main unit power supply (DC 12V) is supplied through this terminal. For the power supply, use the AA-P700 AC adapter. Pin configuration of connectors ( ੬ page 12) Connecting power ( ੬ page 18) Ƽ REMOTE terminal (Metal 10-pin, female) Used to connect external devices such as a freeze switch or flash unit. Pin configuration of connectors ( ੬ page 12) Basic system 2 ( ੬ page 15) 5. Various recording methods ( ੬ page 44) ƽ Dip switches Used to set the SCSI ID, monitor and output colour bar. SCSI ID setting ( ੬ page 24) Monitor output setting ( ੬ page 24) Monitor adjustment ( ੬ page 28) ƾ SCSI terminal (Half-pitch 50-pin, female) Used to directly output to an MO drive or printer. The default setting of the SCSI ID is 7. Change the SCSI ID setting when connecting to a PC, etc. (SCSI-2) Pin configuration of connectors ( ੬ page 13) Connecting an MO/Zip® drive ( ੬ page 20) Connecting a printer ( ੬ page 21) SCSI ID Setting ( ੬ page 24) Connecting to a PC ( ੬ page 66) E11