Konica Minolta bizhub 181 NC-503 User Manual - Page 15
Part name, Description, Press to enter Interrupt mode. The indicator
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
1 Getting ready 22 23 24 25 26 27 28 30 No. Part name 22 [Fax] key/indicator 23 [Scan] key/indicator 24 [Copy] key/indicator 25 [123/ABC] key 26 [Reset] key 27 [Interrupt] key/indicator 1-4 29 Description Press to enter Fax mode. The indicator on the key lights up in green to indicate that the machine is in Fax mode. Press to enter Scan mode. The indicator on the key lights up in green to indicate that the machine is in Scan mode. (Available only when network interface card NC-503 and image controller IC-206 are installed) Press to enter Copy mode. The indicator on the key lights up in green to indicate that the machine is in Copy mode. Press to switch between number input mode and letter input mode. • Press to cancel all settings. • The currently specified job is canceled. (Pressing this key does not switch the machine to Copy or Fax mode.) Press to enter Interrupt mode. The indicator on the key lights up in green to indicate that the machine is in Interrupt mode. Press the key again to cancel Interrupt mode and return to the mode before Interrupt mode was entered. If this key is pressed while a received fax or computer document is being printed, printing stops so that the interrupting copy job can be performed. Press this key again to continue printing the received fax or computer document. NC-503