Konica Minolta bizhub 181 NC-503 User Manual - Page 57

4 Network settings 4.2 Specifying settings from the control panel The network settings can be specified from the control panel of this machine. To specify the network settings from the control panel of the machine, press the [Utility] key, and then specify settings for the various menu parameters available from the "ADMIN. MANAGEMENT" menu in Utility mode. Settings can be specified for the following network-related parameters in the "ADMIN. MANAGEMENT" menu. Menu Submenu Parameter NETWORK SETTING IP ADDRESS SETTING AUTO / SPECIFY SUBNET MASK*1 - GATEWAY*1 - DNS CONFIG DISABLE / ENABLE GATEWAY TX DISABLE / ENABLE WEB SETTING DISABLE / ENABLE LPD SETTING DISABLE / ENABLE SLP SETTING DISABLE / ENABLE SNMP SETTING DISABLE / ENABLE E-MAIL SETTING 1 SENDER NAME - E-MAIL ADDRESS - SMTP SERVER ADDRESS - SMTP PORT NO. 1 to 65535 SMTP TIMEOUT 30 to 300 seconds TEXT INSERT OFF / ON DEFAULT SUBJECT - POP BEFORE SMTP OFF / ON (0 to 60 seconds) E-MAIL SETTING 2 POP3 SERVER ADDRESS - POP3 PORT NO. 1 to 65535 POP3 TIMEOUT 30 to 300 seconds POP3 ACCOUNT - POP3 PASSWORD - USER SETTING NTP SERVER ADDRESS*2 - TIME ZONE*2 - *1 These items can be displayed only IP ADDRESS SETTING is set to "SPECIFY". *2 Can be specified if network interface card NC-503 or image controller IC206 is installed on the machine while fax kit FK-506 is not installed. 4-6 NC-503