Konica Minolta bizhub 181 NC-503 User Manual - Page 28

Network printing 2 2.2 Checking the setup This section provides an overview of the setup procedure that is required for each network printing method. Peer-to-peer printing 1 Connect the network cable. (Refer to "Connecting to a local area net- work (LAN)" on page 1-12.) 2 From the machine's control panel, specify the IP address, subnet mask and default gateway. (Refer to "Specifying an IP address" on page 2-9.) 3 Print the settings information, and then check the settings. (Refer to "Printing the settings information" on page 2-13.) - If optional fax kit FK-506 and image controller IC-206 are not installed, the settings information cannot be printed from the machine's control panel. 4 Install the printer driver. The Peer-to-Peer Utility is installed when the printer driver is installed. - If the GDI driver is to be installed, refer to the User's Guide for the GDI printer controller, included with this machine. If the PCL driver (optional) is to be installed, refer to the User's Guide for image controller IC-206, included with the IC-206 option. 5 Add the network port to the computer. (Refer to "Connecting the com- puter and this machine over a network" on page 2-15.) 2 Reminder When installing the printer driver on an operating system other than Windows 98 SE or Windows Me, the Peer-to-Peer Utility is not installed. NC-503 2-5