Konica Minolta bizhub 181 NC-503 User Manual - Page 63
For the IP address of the DNS server, consult with the network ad
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
4 Network settings 2 Press the [,] or [+] key until "DISABLE" or "ENABLE" is selected, and then press the [OK] key. - If "DISABLE" is selected, the message "ACCEPTED" appears, and then the "NETWORK SETTING" menu appears again. - If "ENABLE" was selected, a screen appears, allowing you to specify the IP address of the DNS server. Continue with step 3. 3 Use the keypad to type in the IP address of the DNS server. - For the IP address of the DNS server, consult with the network administrator. 4 Press the [OK] key. After the message "ACCEPTED" appears, the "NETWORK SETTING" menu appears again. 5 Press the [Reset] key in the control panel. - After the screen shown above appears, turn the machine off, then on again to restart it. 4-12 NC-503
4
Network settings
4-12
NC-503
2
Press the [
,
] or [
+
] key until “DISABLE” or “ENABLE” is selected, and
then press the [OK] key.
–
If “DISABLE” is selected, the message “ACCEPTED” appears, and
then the “NETWORK SETTING” menu appears again.
–
If “ENABLE” was selected, a screen appears, allowing you to spec-
ify the IP address of the DNS server. Continue with step 3.
3
Use the keypad to type in the IP address of the DNS server.
–
For the IP address of the DNS server, consult with the network ad-
ministrator.
4
Press the [OK] key.
After the message “ACCEPTED” appears, the “NETWORK SETTING”
menu appears again.
5
Press the [Reset] key in the control panel.
–
After the screen shown above appears, turn the machine off, then
on again to restart it.