Konica Minolta bizhub 181 NC-503 User Manual - Page 85
press the [OK] key., key until USER SETTING is selected, and then
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
4 Network settings 3 Type in the administrator access code, and then press the [OK] key. - For the administrator access code, consult with the network administrator. The manufacturer's default setting is "000000". - If the code was incorrectly entered, press the [Clear/Stop] key to erase the number, and then type it in correctly. 4 Press the [,] or [+] key until "USER SETTING" is selected, and then press the [OK] key. 5 In the "USER SETTING" menu, press the [,] or [+] key until "NTP SERVER ADDRESS" is selected, and then press the [OK] key. 4-34 NC-503
4
Network settings
4-34
NC-503
3
Type in the administrator access code, and then press the [OK] key.
–
For the administrator access code, consult with the network admin-
istrator. The manufacturer’s default setting is “000000”.
–
If the code was incorrectly entered, press the [Clear/Stop] key to
erase the number, and then type it in correctly.
4
Press the [
,
] or [
+
] key until “USER SETTING” is selected, and then
press the [OK] key.
5
In the “USER SETTING” menu, press the [
,
] or [
+
] key until “NTP
SERVER ADDRESS” is selected, and then press the [OK] key.