Konica Minolta bizhub 181 NC-503 User Manual - Page 35
Press the [Reset] key in the control panel., TING menu appears again.
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2 9 Using the keypad, type in the gateway. Network printing - For the gateway, consult with the network administrator. - If the number was incorrectly entered, press the [Clear/Stop] key to erase it, and then type it in correctly. 10 Press the [OK] key. The message "ACCEPTED" appears, and then the "NETWORK SETTING" menu appears again. 11 Press the [Reset] key in the control panel. - After the screen shown below appears, turn the machine off, then on again to restart it. - In order to apply the new settings, the machine must be turned off, then on again to be restarted. 2-12 NC-503
2
Network printing
2-12
NC-503
9
Using the keypad, type in the gateway.
–
For the gateway, consult with the network administrator.
–
If the number was incorrectly entered, press the [Clear/Stop] key to
erase it, and then type it in correctly.
10
Press the [OK] key.
The message “ACCEPTED” appears, and then the “NETWORK SET-
TING” menu appears again.
11
Press the [Reset] key in the control panel.
–
After the screen shown below appears, turn the machine off, then
on again to restart it.
–
In order to apply the new settings, the machine must be turned off,
then on again to be restarted.