Konica Minolta bizhub 181 NC-503 User Manual - Page 80
Specifying the POP3 port number, menu appears again.
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Network settings 4 6 Type in the IP address or host name for the POP3 server. - The host name can contain a maximum of 64 characters. - To specify a host name for the POP3 server, the DNS setting must be specified. - For the IP address or host name of the POP3 server, consult with the network administrator. 7 Press the [OK] key. After the message "ACCEPTED" appears, the "E-MAIL SETTING 2" menu appears again. 2 Note If a number was incorrectly entered, press the [Clear/Stop] key to erase the number, and then type it in correctly. Specifying the POP3 port number 1 In the "E-MAIL SETTING 2" menu, press the [,] or [+] key until "POP3 PORT NO." is selected, and then press the [OK] key. NC-503 4-29
Network settings
4
NC-503
4-29
6
Type in the IP address or host name for the POP3 server.
–
The host name can contain a maximum of 64 characters.
–
To specify a host name for the POP3 server, the DNS setting must
be specified.
–
For the IP address or host name of the POP3 server, consult with
the network administrator.
7
Press the [OK] key.
After the message “ACCEPTED” appears, the “E-MAIL SETTING 2”
menu appears again.
2
Note
If a number was incorrectly entered, press the [Clear/Stop] key to erase
the number, and then type it in correctly.
Specifying the POP3 port number
1
In the “E-MAIL SETTING 2” menu, press the [
,
] or [
+
] key until “POP3
PORT NO.” is selected, and then press the [OK] key.