Konica Minolta bizhub 181 NC-503 User Manual - Page 31
NetWare server/client (except NDPS), Print the settings information
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2 Network printing NetWare server/client (except NDPS) 1 Connect the network cable. (Refer to "Connecting to a local area net- work (LAN)" on page 1-12.) 2 Specify the necessary settings for connecting this machine to a Net- Ware server. (Refer to "Connecting the computer and this machine over a network" on page 2-15.) 3 Specify the necessary settings for printing through a NetWare server from a NetWare client. (Refer to "Connecting the computer and this machine over a network" on page 2-15.) NetWare server/client (NDPS) 1 Connect the network cable. (Refer to "Connecting to a local area net- work (LAN)" on page 1-12.) 2 From the machine's control panel, specify the IP address, subnet mask and default gateway. (Refer to "Specifying an IP address" on page 2-9.) 3 Print the settings information, and then check the settings. (Refer to "Printing the settings information" on page 2-13.) - If optional fax kit FK-506 and image controller IC-206 are not installed, the settings information cannot be printed from the machine's control panel. 4 Specify the necessary settings for connecting this machine to a Net- Ware server. (Refer to "Connecting the computer and this machine over a network" on page 2-15.) 5 Specify the necessary settings for printing through a NetWare server from a NetWare client. (Refer to "Connecting the computer and this machine over a network" on page 2-15.) 2-8 NC-503