Konica Minolta bizhub 181 NC-503 User Manual - Page 84
USER SETTING, Specifying the NTP server
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Network settings 4 4.6 USER SETTING The settings for the NTP server and time zone are described below. The time can be set accurately with the NTP server. 2 Note The settings for the NTP server and time zone appear only when network interface card NC-503 or image controller IC-206 is installed on the machine while fax kit FK-506 is not installed. Specifying the NTP server By connecting this machine to an NTP server, time data can be accurately maintained by retrieving it from the NTP server automatically. When an email or FTP transmission is sent, that data is used, and the transmission time is added as the name of the scan data and recorded in the transmission log. 1 Press the [Utility] key in the control panel. 2 Press the [,] or [+] key until "ADMIN. MANAGEMENT" is selected, and then press the [OK] key. NC-503 4-33