Konica Minolta bizhub 181 NC-503 User Manual - Page 152
If an NTP server was specified, or not an NTP server has been specified.
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Performing a Scan to E-mail operation 6 3 Press the [,] or [+] key until "TX/RX RESULT" is selected. - If fax kit FK-506 is installed. 4 Press the [OK] key. All communication results are displayed. - The communication results appear starting with the most recent jobs. Press the [,] key to display communication results for older jobs. - The NTP server can be specified if network interface card NC-503 or image controller IC-206 has been installed on the machine. - The transmission results appear differently depending on whether or not an NTP server has been specified. - If an NTP server was specified: The transmission number and transmission date and time appear for data sent with the Scan to E-Mail or Scan to FTP operation. - If an NTP server was not specified: Only the transmission number appears for data sent with the Scan to E-Mail or Scan to FTP operation, but the transmission date and time do not appear. NC-503 6-45