Konica Minolta bizhub 181 NC-503 User Manual - Page 64
Specifying the gateway transmission setting
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Network settings 4 2 Reminder In order to apply the new settings, the machine must be turned off, then on again to be restarted. Specifying the gateway transmission setting 1 In the "NETWORK SETTING" menu, press the [,] or [+] key until "GATEWAY TX" is selected, and then press the [OK] key. 2 Press the [,] or [+] key until "DISABLE" or "ENABLE" is selected, and then press the [OK] key. - Whether "DISABLE" or "ENABLE" is selected, the message "ACCEPTED" appears, and then the "NETWORK SETTING" menu appears again. 2 Note The setting for gateway transmissions appears when optional fax kit FK506 is installed. NC-503 4-13
Network settings
4
NC-503
4-13
2
Reminder
In order to apply the new settings, the machine must be turned off, then
on again to be restarted.
Specifying the gateway transmission setting
1
In the “NETWORK SETTING” menu, press the [
,
] or [
+
] key until
“GATEWAY TX” is selected, and then press the [OK] key.
2
Press the [
,
] or [
+
] key until “DISABLE” or “ENABLE” is selected, and
then press the [OK] key.
–
Whether “DISABLE” or “ENABLE” is selected, the message “AC-
CEPTED” appears, and then the “NETWORK SETTING” menu ap-
pears again.
2
Note
The setting for gateway transmissions appears when optional fax kit FK-
506 is installed.