Konica Minolta bizhub 181 NC-503 User Manual - Page 34
Use the keypad to type in the IP address, and then press the [OK] key., or gateway settings.
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Network printing 2 6 Press the [,] or [+] key until "AUTO" or "SPECIFY" is selected, and then press the [OK] key. - If "AUTO" was selected, the IP address will automatically be obtained from the DHCP server. After the message "ACCEPTED" appears, the "NETWORK SETTING" menu appears again. - If "SPECIFY" is selected, a screen appears, allowing you to specify the IP address. Continue with step 7. - "AUTO" is available only if a DHCP server is on the network. If "AUTO" is selected, it will not be necessary to specify the subnet mask or gateway settings. 7 Use the keypad to type in the IP address, and then press the [OK] key. - If the number was incorrectly entered, press the [Clear/Stop] key to erase it, and then type it in correctly. 8 Use the keypad to type in the subnet mask value, and then press the [OK] key. NC-503 - For the subnet mask, consult with the network administrator. - If the value was incorrectly entered, press the [Clear/Stop] key to erase it, and then type it in correctly. 2-11