Konica Minolta bizhub 181 NC-503 User Manual - Page 73
Specifying the SMTP server address, For the IP address or host name of the SMTP server, consult
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
4 Network settings Specifying the SMTP server address 1 In the "E-MAIL SETTING 1" menu, press the [,] or [+] key until "SMTP SERVER ADDR." is selected, and then press the [OK] key. 2 Type in the IP address or host name for the SMTP server. Press the [OK] key. - The host name can contain a maximum of 64 characters. - To specify a host name for the SMTP server, the DNS setting must be specified. - For the IP address or host name of the SMTP server, consult with the network administrator. 3 Press the [OK] key. After the message "ACCEPTED" appears, the "E-MAIL SETTING 1" menu appears again. 2 Note If a number was incorrectly entered, press the [Clear/Stop] key to erase the number, and then type it in correctly. 4-22 NC-503
4
Network settings
4-22
NC-503
Specifying the SMTP server address
1
In the “E-MAIL SETTING 1” menu, press the [
,
] or [
+
] key until “SMTP
SERVER ADDR.” is selected, and then press the [OK] key.
2
Type in the IP address or host name for the SMTP server. Press the
[OK] key.
–
The host name can contain a maximum of 64 characters.
–
To specify a host name for the SMTP server, the DNS setting must
be specified.
–
For the IP address or host name of the SMTP server, consult with
the network administrator.
3
Press the [OK] key.
After the message “ACCEPTED” appears, the “E-MAIL SETTING 1”
menu appears again.
2
Note
If a number was incorrectly entered, press the [Clear/Stop] key to erase
the number, and then type it in correctly.