Konica Minolta bizhub 181 NC-503 User Manual - Page 86
Specifying the time zone, The message ACCEPTED appears, and then the USER SETTING
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Network settings 4 6 Use the keypad to type in the NTP server address, and then press the [OK] key. - If an NTP server was specified: The date and time that data is sent with the Scan to E-Mail or Scan to FTP operation are automatically added to the data at the same time that the transmission date and time are recorded in the transmission log. - If an NTP server was not specified: Only a transmission number is added to data sent with the Scan to E-Mail or Scan to FTP operation; the transmission date and time are not added to the data. In addition, the date and time are not recorded in the transmission log. - For the NTP server address, consult with the network administrator. The message "ACCEPTED" appears, and then the "USER SETTING" menu appears again. 7 Press the [Reset] key. The time is acquired from the NTP server, and then the time on the machine is set. Specifying the time zone 1 Press the [Utility] key in the control panel. NC-503 4-35