Konica Minolta bizhub 181 NC-503 User Manual - Page 62
Specifying the DNS settings, In order to apply the new settings, the machine must be turned off, then
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Network settings 4 11 Press the [Reset] key in the control panel. - After the screen shown below appears, turn the machine off, then on again to restart it. 2 Note If a number was incorrectly entered, press the [Clear/Stop] key to erase the number, and then type it in correctly. 2 Reminder In order to apply the new settings, the machine must be turned off, then on again to be restarted. Specifying the DNS settings 1 In the "NETWORK SETTING" menu, press the [,] or [+] key until "DNS CONFIG." is selected, and then press the [OK] key. NC-503 4-11
Network settings
4
NC-503
4-11
11
Press the [Reset] key in the control panel.
–
After the screen shown below appears, turn the machine off, then
on again to restart it.
2
Note
If a number was incorrectly entered, press the [Clear/Stop] key to erase
the number, and then type it in correctly.
2
Reminder
In order to apply the new settings, the machine must be turned off, then
on again to be restarted.
Specifying the DNS settings
1
In the “NETWORK SETTING” menu, press the [
,
] or [
+
] key until “DNS
CONFIG.” is selected, and then press the [OK] key.