Konica Minolta bizhub 181 NC-503 User Manual - Page 81
Specifying the POP3 server connection timeout, key until POP3
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
4 2 Type in the port number of the POP3 server. Network settings - A port number between 1 and 65535 can be specified. Normally, port number 110 is used. 3 Press the [OK] key. After the message "ACCEPTED" appears, the "E-MAIL SETTING 2" menu appears again. Specifying the POP3 server connection timeout 1 In the "E-MAIL SETTING 2" menu, press the [,] or [+] key until "POP3 TIMEOUT" is selected, and then press the [OK] key. 2 Type in the length of time (in seconds) until the connection times out. - The timeout period can be set between 30 and 300 seconds. 3 Press the [OK] key. After the message "ACCEPTED" appears, the "E-MAIL SETTING 2" menu appears again. 4-30 NC-503
4
Network settings
4-30
NC-503
2
Type in the port number of the POP3 server.
–
A port number between 1 and 65535 can be specified. Normally,
port number 110 is used.
3
Press the [OK] key.
After the message “ACCEPTED” appears, the “E-MAIL SETTING 2”
menu appears again.
Specifying the POP3 server connection timeout
1
In the “E-MAIL SETTING 2” menu, press the [
,
] or [
+
] key until “POP3
TIMEOUT” is selected, and then press the [OK] key.
2
Type in the length of time (in seconds) until the connection times out.
–
The timeout period can be set between 30 and 300 seconds.
3
Press the [OK] key.
After the message “ACCEPTED” appears, the “E-MAIL SETTING 2”
menu appears again.