Kyocera FS-C2126MFP FS-C2026MFP/C2126MFP Operation Guide - Page 106
Registering Settings, Recalled., Program 1, Registered.
View all Kyocera FS-C2126MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Basic Operation ID Card Copy is printed on the Program 1 key. When the functions are deleted by overwriting Program 1 key, seal the label supplied with the machine and write the function name in it. The procedure for using ID Card copying is explained below. 1 Press the Copy key when the Copy key/indicator is off. NOTE: If the Message Display is turned off, press the Power key and wait for the machine to warm up. 2 Place the original on the platen. Put the scanning side facedown in the center of Statement or A5 size scanning area. Recalled. z Program 1 NOTE: For loading instructions, refer to Loading Originals on page 2-43. 3 Press the Program 1. The ID Card Copy function is recalled. Registering Settings Registered. z Program 1 4 Press the Start key. Scanning begins. 5 Turn over the original on the platen and press the Start key. 6 After scanning all originals, press [End Scan] (the Right Select key) to start copying. After making settings, press and hold the one of the Program 1 to 4 keys where you want to register the settings for 3 seconds. The current settings are registered to the selected program key. 3-4